KORED Submerged Hollow Fiber Membrane
The submerged hollow fiber membrane has high fouling resistance and high
integration, so it is suitable to be applied to large-capacity sewage or wastewater treatment such as MBR and
sewage discharge water re-use.
The KORED submerged hollow fiber membrane is a
highly economical
product that reduces maintenance costs by minimizing air consumption and
physical cleaning with a dual aeration diffuser structure differentiated from
existing products of other companies. sewage
treatment plant suppliers
l Reinforced contamination
resistance through dual aeration structure equipped at the center and bottom of the module
l 8 inch module with a film
area of 35m2 has a high degree of integration, so minimizing installation
area
l Uniform physical cleaning
with optimized dual aeration structure at the bottom and center of the module
l 30% reduction of
air consumption per membrane area by reinforcing
cleaning effect through the optimal arrangement of air diffusers
KORED Pressurized
Hollow Fiber Membrane
The KORED’s unique
module housing design mitigates the sudden impact of influent water even in the
state of the high packing density of the hollow fiber membrane and enhances the
permeability and stability of the product by equalizing the inflow flow rate. molecule air
purifier Korea
l By applying honeycomb
baffle, it solves the water Hammer phenomenon of impact of influent water, and prevents membrane contamination caused by the drift by distributing the
inflow flow evenly.
l Uniform filtration
performance by improving the fluid flow of high-packing density module by
applying the separator
l By minimizing the
pressure loss and maximizing the packing density of the hollow fiber, the
high-efficiency and highly integrated product is realized, and the internal pressure design
of the housing in response to external impacts has been reinforced.
l Realization of optimum
design of hollow fiber membrane density and internal or external pressure loss
l
Reinforced module stability by withstanding the pressure of 10kgf/㎠, which is 5 times the maximum operating pressure of the internal
pressure performance
No comments:
Post a Comment